Kiramek 1370S, Owner'S Manual, Page: 13 / 48

6)3)/.å3å/7.%23å'5)$%
System Operation
./#()20å-%4(/$åå
This method of disarming is identical to
the “Normal” method except there are
no siren chirps emitted when you dis-
arm. Press Pager Button-II or Button-III
then release. (You may have to press Button-II twice.)
The doors will then unlock and hazard lights will flash 3 times (if so in -
stalled). The Pager Remote will beep 2 times (or vibrate twice, if Vibe Mode
is selected) , and icons will update (see Fig-4 above). The system is now
disarmed, and you may enter the vehicle without triggering the siren.
()'(å3%#52)49å$)3!2-
When the system is “triggering” (warn-
ing chirps, siren blast, hazard flash), two
button presses are required to disarm.
This feature allows you to stop the trigger
condition with only 1 press while keeping the system
armed. You can press Buttons I or II or III (continues on the next page) .
$)3!2-).'
./2-!,å-%4(/$åå
This method is the typical way to disarm the 1370,
with confirmation chirps active. Press Button-I
on the Pager remote while the system is armed. The
doors will then unlock and hazard lights will flash 3
times (if so installed). The siren will chirp 3 times.
The Pager remote will beep 2 times (or vibrate twice, if in Vibe mode) , and
icons will update (see Fig-4 below). The system is now disarmed, and you
may enter the vehicle without triggering the siren.
./4%å4OåDISARMåWITHOUTåTHEåREMOTEåSEEåPAGEå
I
II III OR
I II III
FIG-4: Pager LCD Icon Change After Disarming