Kikusui TOS6200A, User Manual, Page: 92 / 154

6-8 GPIB and RS-232C TOS6200A/6210
*IDN?
Inquiries about the model name and firmware version of the tester.
Message
Query message:
*IDN?
Response
Returns the model name of the tester to *IDN? in the following manner:
*RST
Initializes the tester (to original factory-set settings). Note that settings in the
INTERFACE screen will not be initialized.
For details on initializes, see 4.11, "Initialize”
Message
Command message:
*RST
*SRE
Used to set or reset each bit of the service request enable register.
Also used to inquire about the contents of the service request enable register.
For details on the service request enable register, see 6.4, "Registers.”
Message
Command message:
*SRE <NR1>
*SRE <HEX>
Query message:
*SRE?
Program data
Set value: 0 to 255 (default is 112)
00H to FFH (default is 70H)
Resolution: 1
(Example)
*SRE #H01
Response
Returns the contents of the service request enable register to *SRE?.
(Example) If Bit 5 of the service request enable register is set, “
32
” is returned.
KIKUSUI ELECTRONICS CORP., TOS6210, 0, 1.00
Version No.
Serial No.
(not used)
Model name Company name