Kikusui TOS6200A, User Manual, Page: 110 / 154

6-26 GPIB and RS-232C TOS6200A/6210
6.3.4 Messages Relating to the Tester Status
This subsection describes device messages used to check the status of the tester or
measured values.
FUNCTION (FUN)
Shifts the LCD to each mode (setting screen) or inquires about the current mode
(displayed screen).
Message
Command message:
Fun{0|1|2|3|4}
Query message:
FUN?
Program data
Set value: 0 Test conditions setup screen (MAIN)
1 Program screen (AUTO)
2 Program edit screen (AUTO EDIT)
3 System setup screen (SYSTEM1)
4 Offset screen (OFFSET)
5 Those other than 1 to 4 above (not avail-
able)
Response
Returns the current mode (displayed screen) in response to FUN?.
(Example) When the current mode (displayed screen) is any figure other than 0 to 4
A value of
5
is returned.
IDATA? (IDAT?)
Inquires about the present measured current value.
Message
Query message:
IDAT?
Response
Returns the present measured current value in response to IDAT?
It returns the current value being measured during a test or the measured current
value obtained immediately before when the test was completed.
(Example) When the present measured current value is 25.0 A
A value of
25.0
is returned.