Kikusui TOS6200A, User Manual, Page: 121 / 154

TOS6200A/6210 GPIB and RS-232C 6-37
Status Byte Register, Service Request Enable Register
Event Status Register
Bit Descriiption
7 Not used in the tester
6 RQS(Request) Indicates that a service request has been issued. Reset when read
using a serial poll.
MSS
(Master Summary Status) ORed result of the status byte register and service request enable reg-
ister, which is ready by running *STB.
5 ESB
(Standard Event Status Bit) Indicats that a bit of the event status register has been set.
4 DSB(Device Status Bit) Indicats that a bit of the device status register has been set.
3 Not used in the tester
2 Not used in the tester
1 Not used in the tester
0 Not used in the tester
Bit Descriiption
7
Not used in the tester
6
Not used in the tester
5 CME(Command Error)
Indicates that a syntax, data, or out-of-range error has occurred.
4 EXE(Execution Error)
Indicates that an invalid device message has been received during
testing or while in protection status.
3
Not used in the tester
2
Not used in the tester
1
Not used in the tester
0
Not used in the tester