Kikusui TOS6200A, User Manual, Page: 61 / 154

TOS6200A/6210 Basic Operation 4-27
4.7 Program
A combination of test conditions stored in memory allows you to set 100 programs.
Up to 100 steps may be set as a single program. Note that the number of steps that
can be set for programs is up to 500 in total. For additional information on memory,
see 4.6, "Panel Memory.”
Press the AUTO key to turn on the AUTO key LED and display the program screen
(AUTO).
Program example:
Enter the following settings to create a program like the one above:
00 MEM01-9.9 s
01 MEM02-HOLD
02 MEM03-0s
END
Description of the program example:
The program performs a test of memory 01 in step 00 and then that of memory 02 in
step 01 9.9 seconds after that. Because the interval time of step 01 is set to HOLD,
the test of memory 3 in step 02 does not start unless you press the START switch.
After the START switch is pressed and the test in step 02 is complete, the tester
enters the ready status.
Replacing END at the end of the program with RET instructs the program to repeat
testing from step 00.
AUTO AUTO
READY
PRG
00 : --UNTITLED--
TOTAL:10
00 MEM01-9.9 s
01 MEM02-HOLD
02 MEM03- 0 s
END
Program name Step number
Repeat setting
Program number
Running step
Steps waiting to be run
Total number of
steps
Memory 1 Interval of 9.9 s Memory 2 Interval of HOLD Memory 3 Interval of 0s
Step 00 Step 01 Step 02
END
Flow of programmed testing