Kikusui KHA1000, Operation Manual, Page: 47 / 274

KHA1000
2-17
2
In
sta
lla
tio
n
a
n
d
P
re
p
ara
tio
n
fo
r U
se
Fig.2-9 Switch or circuit breaker to be used for direct connection
to commercial power supply (AC line)
1.
Turn off the switches on the switchboard.
2.
Connect the grounding terminal on the switchboard to G of the
SOURCE terminal.
The customer is required to obtain an installation wire. Select the rated current of the
wire according to the input current of the EUT.
3.
As shown in Fig. 2-9, install the switch or circuit breaker between the
SOURCE terminal and the commercial power supply (AC line).
Match the polarities (L, N, and G) of the terminal and switchboard to each other. The
customer is requested to prepare the switch or circuit breaker and wires.
page 4-4
Turn on the switches on the switchboard and installed switch or circuit breaker
immediately before starting a test.
L N G
EUT
G N L
G N L
Voltage sensing terminal
External signal
input terminal
LOAD terminal
S OURCE terminal
To switches on switchboard
S witch or circuit breaker
See