Kikusui KHA1000, Operation Manual, Page: 181 / 274

KHA1000
6-25
6
V
o
lta
g
e C
h
an
g
es
a
n
d
F
lu
ctu
atio
n
s a
n
d
F
lic
ke
r T
es
t
Explanation
No.
Item Content Explanation
8 dc (%)
The maximum value of relative steady-state voltage change in one-segment
(Seg1 -) time
• Limit: Limit value
9 dmax (%)
The maximum value of maximum relative voltage change in one-segment
(Seg1 -) time
• Limit: Limit value
10
Tmax
*1
(ms)
The maximum value of time during which d (t) exceeded 3.3 % in one-
segment (Seg1 -) time
• Limit: Limit value
11 Judge
Judgment of voltage fluctuation and flicker in one-segment (Seg1 -) time
PASS, FAIL, or WARNING: WARNING is displayed if the margin is exceeded.
12 Plt
Long-time flicker value in all-segment (Seg1 -) time (set by the Pst
measurement count)
• Limit: Limit value
• Measurement: Measured value
13 Judge
Judgment of Plt (long-time flicker value)
PASS, FAIL, or WARNING: WARNING is displayed if the margin is exceeded.
14 dmax (%)
dmax (%) value in all-segment (Seg1 -) time (set by the d measurement
count)
• Limit: Limit value
• Average: Average measured value excluding the maximum and minimum
values
15 dc (%)
dc (%) value in all-segment (Seg1 -) time (set by the d measurement count)
• Limit: Limit value
• Maximum: Maximum value
16
Tmax
*1
(ms)
Tmax
*1
(ms) time in all-segment (Seg1 -) time (set by the d measurement
count)
• Limit: Limit value
• Maximum: Maximum value
*1.Displayed as d(t)>3.3% depending on the selected standard.