Kikusui KHA1000, Operation Manual, Page: 216 / 274

8-24
KHA1000
“IEC :ED30:ED10 ” IEC Ed3.0/Ed1.0
“JIS :2011:ED10 ” JIS 2019/Ed1.0
“JIS :2011:ED20 ” JIS 2019/Ed2.0
“JIS:2019:ED10” JIS 2019/Ed1.0
“JIS:2019:ED20” JIS 2019/Ed2.0
“IEC:ED50:ED10” IEC Ed5.0/Ed1.0
“IEC:ED50:ED21” IEC Ed5.0/Ed2.1 (Default)
When *RST is sent, settings are made as shown in Table 8-4.
Response
Returns a test standard.
• The conventional setting value “IEC:ED30A2:ED20A1” and “IEC:ED30A2:ED10”
can be used, but the IEC 61000-3-2 Ed5.0 standard is applied.
• The conventional setting value “JIS:2011:ED10” and “JIS:2011:ED20” can be
used, but the JIS C61000-3-2(2019) standard is applied.
HARM:CLAS
Sets the class of EUT.
The reference value for determining conformance to the standard is the limit value
corresponding to the class.
Command
HARMonic:CLASs ”{A|B|C|D}”
HARMonic:CLASs?
Parameter
Value: “A” Class A (Default)
“B” Class B
“C” Class C
“D” Class D
When *RST is sent, settings are made as shown in Table 8-4.
Response
Returns the class of EUT.
HARM:FREQ:NOM
Sets the nominal frequency. Set the nominal frequency according to the rating of the EUT.
Executing this command simultaneously sets VF:FREQeuncy:NOMinal to the same
value.
Command
HARMonic:FREQuency:NOMinal {50|60}
HARMonic:FREQuency:NOMinal?
Parameter
Value: 50 or 60 (The default is 50.)
Unit: Hz