Kikusui KHA1000, Operation Manual, Page: 217 / 274

KHA1000
8-25
8
R
em
o
te
C
o
n
tr
o
l
When *RST is sent, settings are made as shown in Table 8-4.
When HARM:STAN “{IEC:ED22:ED20 | IEC:ED22:ED10 | IEC:ED30:ED20 |
IEC:ED30:ED10}” is sent, the nominal frequency is set to 50.
Response
Returns the nominal frequency in the <NR3> format.
HARM:VOLT:NOM
Sets the nominal voltage. Set the nominal frequency according to the rating of the
EUT.
Executing this command simultaneously sets VF:VOLTage:NOMinal to the same
value.
Command
HARMonic:VOLTage:NOMinal <NRf>
HARMonic:VOLTage:NOMinal?
Parameter
Value:
100, 120, 200, or 100 to 300
IEC Ed3.0/Ed2.0, IEC Ed2.2/Ed2.0, IEC Ed3.0/Ed1.0, IEC Ed2.2/
Ed1.0, JIS 2005/Ed2.0, JIS 2005/Ed1.0, JIS 2019/Ed2.0, JIS 2019/
Ed1.0 (The default is 230)
Value:
100, 120, 200, or 230
JIS 2003/Ed1.0 (The default is 230)
Unit:
V
When *RST is sent, settings are made as shown in Table 8-4.
When HARM:STAN “{IEC:ED22:ED20 | IEC:ED22:ED10 | IEC:ED30:ED20 |
IEC:ED30:ED10}” is sent, the nominal voltage is set to 230.
Response
Returns the nominal voltage value in the <NR3> format.
HARM:MARGin
Sets the margin for the limit value. Set a relative value of the reference limit value
(100). For instance, specify 80 to set the margin to 80 % of the reference limit value.
Command
HARMonic:MARGin {<numeric>|MIN|MAX}
HARMonic:MARGin?
Parameter
Value: 10 to 100 (The default is 100.)
Unit: PCT
When *RST is sent, settings are made as shown in Table 8-4.
Response
Returns the margin in the <NR3> format.