Kikusui KHA1000, Operation Manual, Page: 223 / 274

KHA1000
8-31
8
R
em
o
te
C
o
n
tr
o
l
HARM:LIN:STAT
Sets whether to use the reference impedance.
Command
HARMonic:LIN:STATe (ON|OFF|1|0)
HARMonic:LIN:STATe?
Parameter
Value:
OFF(0) The reference impedance is not used (default).
ON(1) The reference impedance is used.
Response
Returns whether the reference impedance is being used in <NR1> format.
8.7.3 Voltage Fluctuation Measurement Mode
VF:STAN:LIM
Sets the limitation standard.
Command
VF:STANdard:LIMitation[:NAME] "IEC 61000-3-3 Ed2.0"
VF:STANdard:LIMitation[:NAME]?
Parameter
Value:
"IEC 61000-3-3 Ed2.0" (Default)
When *RST is sent, settings are made as shown in Table 8-4.
Response
Returns the limitation standard.
•
To perform a test based on the IEC 61000-3-3 Ed3.1 standard, set the
VF:STAN:MTEC command parameter to “IEC 61000-4-15 Ed2.0.” When the
standard for measurement techniques is set to IEC 61000-4-15 Ed2.0, the
standard is automatically set to IEC 61000-3-3 Ed3.1 in test conditions, on the
KHA1000 display, and in reports. The measuring instrument requirements of the
IEC 61000-3-3 Ed3.1 standard are specified in IEC 61000-4-15 Ed2.0.