Kikusui KHA1000, Operation Manual, Page: 34 / 274

2-4
KHA1000
Harmonic current test and voltage fluctuation test system
Table 2-2 Components (harmonic current test and voltage
fluctuation test system)
Name Purpose
No. indicated in
Fig.2-2 on page 2-5
Power cable 1
• Connects AC Power Supply to Line
Impedance Network.
1
Power cable 2
• Connects Line Impedance Network to
this product.
2
Power cable 3
• Connects EUT to this product.
3
Relay outlet
• Connects EUT to this product.
• Used when EUT has a cord with a
plug.
• Outlet shape must suit the plug.
4
Wire kit for short-
circuiting voltage
sensing terminals
• For voltage sensing in this product
UL1015 and AWG18 wires.
• Wired to voltage sensing terminal plug
at the time of shipment.
5
Wire for externally
connecting voltage
sensing terminal
• For voltage sensing when the wire to
EUT is long UL1015 and AWG18
wires.
6
Cable for AC Power
Supply control signal
• Connects AC Power Supply to this
product.
RS232C cable (cross cable)
7
Cable for Line
Impedance Network
control signal
• Connects AC Power Supply to Line
Impedance Network.
• Attached to Line Impedance Network
(mini DIN connector type cable).
8
Control card for Line
Impedance Network
• Connects cable for Line Impedance
Network control signal.
• Attached to Line Impedance Network.
9
LAN cable
(category 5)
• Connects to network printer (only when
factory option is mounted).
10
See