49
Assemble units as described herein only. To do otherwise
may result in instability. All screws, nuts and bolts must be
tightened securely and must be checked periodically after
assembly. Failure to assemble properly, or to secure parts
may result in assembly failure and personal injury.
Tattoo™
Screens - Accessories
Assembly Instructions
Coat Hook Installation
1. At the underside of each horizontal
frame are two horizontal frame
channels separated by the screen
core. Determine the location the coat
hook will mount to the frame, per the
space-planning layout (Figure 3).
2. Locate the horizontal frame access
holes at each end of the horizontal
frame channel. Insert the nylon glide
through one of the access holes
and slide the coat hook towards the
center of the screen. Tighten the
screw on the underside of the nylon
glide to hold the coat hook in place
(Figures 3 & 4, Details E, F & G).
3. Two coat hook stoppers are included
with each coat hook kit. The stoppers
can be used to prevent the coat hook
from accidentally falling out of the
access holes. To install the stopper
insert it into the access hole and
slide it just past the access hole
and tighten the screw to hold it in
place. If it is desired that the coat
hook be constrained to one location,
a stopper may be installed at each
side of the coat hook, at the hook's
desired location (Detail H).
Flex Screen
or Spine
Screen
nylon
glide
horizontal
frame
Figure 3
screen
core
coat
hook
Detail E
horizontal
frame
access hole
horizontal
frame
channel
horizontal
frame
coat
hook
nylon
glide
Detail F
coat
hook
horizontal
frame
channel
horizontal
frame
Detail G
horizontal
frame
channel
horizontal
frame
coat
hook
Flex Screen
or Spine
Screen
horizontal
frame
Figure 4
screen
core
coat
hook
Detail H
horizontal
frame
channel
horizontal
frame
coat
hook
stopper
