41
Assemble units as described herein only. To do otherwise
may result in instability. All screws, nuts and bolts must be
tightened securely and must be checked periodically after
assembly. Failure to assemble properly, or to secure parts
may result in assembly failure and personal injury.
Tattoo™
Screens - Spine Screen Trim
Assembly Instructions
Flat Aluminum Top Cap
Installation
1. On the rib side of the flat aluminum
top cap, space molding clips evenly
apart and press them onto the ribs of
the top cap as illustrated (Figure 46).
2. Position the flat aluminum top cap
with molding clips down against the
horizontal frame channel. Using a
firm hand, press on the top cap at
the molding clip location to snap
molding clips into the horizontal
frame channel (Figure 46).
Figure 46
Spine
Screen
molding
clip
flat aluminum
top cap
horizontal
frame
horizontal
frame
channel
