35
Assemble units as described herein only. To do otherwise
may result in instability. All screws, nuts and bolts must be
tightened securely and must be checked periodically after
assembly. Failure to assemble properly, or to secure parts
may result in assembly failure and personal injury.
Tattoo™
Screens - Spine Screen Trim
Assembly Instructions
5. Carefully lift and arrange Spine
Screen #2 so that the adjustable foot
is over the foot of the Flex Screen
(Detail ZZ). Move Spine Screen #2
over to align its installed screen
connector/clips with the appropriate
power pole channel. Level and plumb
Spine Screen #2 to #1 by twisting the
height-adjustable glides clockwise or
counter-clockwise until the frame’s
vertical edges are aligned and tops of
screens are at the same height. Press
Spine Screen #2 screen connector/
clips into the vertical spacer channel
to engage such that both Spine
Screens are snapped into the in-line
spacer (Figure 39 & Detail YY).
Spine
Screen
(#1)
Spine
Screen
(#2)
vertical
spacer
channel
screen
connector
molding
clip
Flex
Screen
bridge
foot
adjustable
glide foot
spacer
(in-line)
Figure 39
Detail YY
Spine
Screen
(#2)
screen
connector
molding clip
(factory installed)
spacer
(in-line)
vertical
frame
channel
Detail ZZ - Spine Screen 3-Way
Intersection with Flex Screen
(adjustable feet over bridge foot)
bridge
foot
adjustable
glide feet
Flex
Screen
Spine
Screen
