27
Assemble units as described herein only. To do otherwise
may result in instability. All screws, nuts and bolts must be
tightened securely and must be checked periodically after
assembly. Failure to assemble properly, or to secure parts
may result in assembly failure and personal injury.
Tattoo™
Screens - Spine Screen 10-Wire Power
Assembly Instructions
5. Carefully lift and arrange Spine
Screen #2 so that the adjustable foot
is over the foot of the Flex Screen
(Detail MM). Move Spine Screen #2
over to align its installed screen
connector/clips with the appropriate
vertical spacer channel. Level and
plumb Spine Screen #2 to #1 by
twisting the height-adjustable glides
clockwise or counter-clockwise until
the frame’s vertical edges are aligned
and tops of screens are at the same
height. Press Spine Screen #2 screen
connector/clips into the vertical
spacer channel to engage such that
both Spine Screens are snapped into
the in-line base infeed spacer
(Figure 27 & Detail LL).
Spine
Screen
(#1)
Spine
Screen
(#2)
vertical
spacer
channel
screen
connector
molding
clip
Flex
Screen
bridge
foot
adjustable
glide foot
base infeed
spacer
(in-line)
Figure 27
Detail LL
Spine
Screen
(#2)
screen
connector
molding clip
(factory installed)
base
infeed spacer
(in-line)
vertical
frame
channel
Detail MM - Spine Screen 3-Way
Intersection with Flex Screen
(adjustable feet over bridge foot)
bridge
foot
adjustable
glide feet
Flex
Screen
Spine
Screen
