10
Assemble units as described herein only. To do otherwise
may result in instability. All screws, nuts and bolts must be
tightened securely and must be checked periodically after
assembly. Failure to assemble properly, or to secure parts
may result in assembly failure and personal injury.
Tattoo™
Screens - Spine Screen 10-Wire Power
Assembly Instructions
Screen-to-Screen 10-Wire Jumper
Installation
Note:
Screen-to-screen jumpers
pass power between the pre-mounted
10-wire rigid wireways, through
the pass-through ankles, from one
screen to another. Screen-to-screen
jumpers are 17
3
/
4
” long.
1. At the location specified for a
screen-to-screen jumper, route the
jumper through the pass-through
ankles, then plug the ends into each
rigid wireway (Figure 6 & Detail L).
Figure 6
Spine Screen
10-wire
jumper
10-wire
jumper
Spine Screen
screen-to-screen
10-wire jumper
pass-through
ankles
Detail L
Spine Screen
screen-to-screen
10-wire jumper
pass-through
ankles
10-wire
rigid wireway
