Keysight Technologies U3047AE04, User'S And Service Manual

Page: 43 / 81

User’s and Service Guide U3047-90002 37
U3047AE04 Control Lines
Control Lines
The 15 pin female D-Sub connector on the rear panel provides 8 latched data lines that can be
used to control your device under test (DUT). The lines can be controlled with the multiport
external test set control, or Test Set I/O commands. Refer to
“External Test Set Control
Operation” on page 22 and “Setting the Control Lines with Address and Data Values” on page
41 . See Table 10 for DUT control line specification.
The output voltage of the lines can be from the internal adjustable voltage source (+2 to +5 Vdc),
or an external dc power supply depending on how the connection to the control line is
configured. When using an external power supply a positive or negative voltage can be used.
Refer to
Figure 31 and Table 11 on page 38 for control line pin location and description. Refer
to “Internal Voltage Supply Configuration” on page 39 and “External Voltage Supply
Configuration” on page 40 for configurations.
Table 10 DUT Control Specifications
Item Specifications
Connector Type D–Sub, 15–pin female
Max Output Line Current 100 mA (each line)
Control Line DC resistance < 10 Ω (each line)
Voltage Range:
Positive Input 0 to +5 V
Negative Input –5 to 0 V
Internal Variable Voltage +2 to +5 V