User’s and Service Guide U3047-90002
11
U3047AE04
Front and Rear Panel Features
Power Cords
A line power cord is supplied in one of several configurations, depending on the
destination of the original shipment. Keysight can supply additional certified power cords to
meet region electrical supply and receptacle configurations. Please contact Keysight at
for assistance
with
power cord selection.
The detachable power cord is the instrument disconnecting device. It
disconnects the mains circuits from the mains supply before other parts of
the instrument. The standby switch is only a standby switch and is not a
LINE switch (disconnecting device)
.
Available Fuses
•
Fuse (F 5 A/250V, 2110-0709) UL listed and CSA certified.
•
Fuse (F 8 A/250V, 2110-0342) UL listed and CSA certified.
For continued protection against fire hazard, replace fuses, and or circuit
breakers only with same type and ratings. The use of other fuses, circuit
breakers or materials is prohibited.
Figure 4
Line Fuse
Verify that the premise electrical voltage supply is within the range specified
on the instrument.
