User’s and Service Guide U3047-90002
13
U3047AE04
System Setup
4.
Remove the top two standoffs and screws (0515-2317) from the rear panel on the Test
Set.
5.
Install the two rear locking feet onto the Test Set. The N5242-20138 is the right foot and
the N5242-2013
9
is the left foot. Two screws (0515-2317) are included with this option.
Figure 7
Install Locking Feet on Test Set
6. Place the PNA-X on top of the Test Set and ensure that the front frame of the PNA-X is
positioned slightly forward of the locks that are attached to the Test Set. Slide the PNA-X
back so the locks engage the front frame of the analyzer.
Figure 8
Locking the Analyzer
N5242-20139
N5242-20138
Test Set
Front Frame
Network Analyzer
Front Frame
Slide the network Analyzer
back to engage the lock link
in the back of the network
analyzer's front frame
Lock Link
screw
Slide the network analyzer
back to engage the lock link in
the back of the network
analyzer’s front frame,
Screw 0515-2317 (x 2)
(T15 M3.5 x 0.6 12 mm
