Keysight Technologies InfiniVision 6000L Series, Service Manual

Page: 85 / 100

Replacing 6000L Assemblies
5
6000L Series Oscilloscopes Service Guide 85
To remove the power shaft
1 Perform the previous procedures:
• “To remove the bottom cover" on page 73
• “To remove the power supply" on page 79
• “To remove the fan" on page 81
2 Use a flat-blade screwdriver to gently spread the latch while pushing the power
shaft forward.
Figure 22 Removing the power shaft.
3 Lift and remove it from the deck.
4 When reinserting the power shaft, push the shaft into the power switch until the
shaft snaps onto the switch.
CAUTION
Twisting the latch too much could cause it to break!