Keysight Technologies InfiniVision 6000L Series, Service Manual

Page: 82 / 100

82 6000L Series Oscilloscopes Service Guide
5
Replacing 6000L Assemblies
4 Replace the fan.
a Place the rectangular part of the flexible fan mount over the fan.
b Place the pegs in the flexible fan mount into the holes in the top and bottom
of the fan.
c Align the holes in the bottom of the flexible fan mount over the studs on the
chassis as you slide the fan over the divider in the chassis.
d Ensure that the notch in the rectangular portion of the fan mount aligns with
the front of the chassis.
Figure 20 Installing the fan.
Pegs Fit in
Fan Holes
Holes in
Bottom Fit
Over Studs
Align
Notch
and
Chassis
Chassis
Divider