Keysight Technologies InfiniVision 6000L Series, Service Manual

Page: 17 / 100

Characteristics and Specifications
1
6000L Series Oscilloscopes Service Guide 17
6000L Environmental Conditions
Environment
Indoor use only.
Ambient temperature
Operating –10 °C to +40 °C; non-operating –40 °C to
+70 °C
Humidity Operating 95% RH at 40 °C for 24 hr; non-operating 90% RH at 65 °C
for 24 hr
Altitude
Operating to 2,000 m (6,561 ft); non-operating to 15,244 m (50,000 ft)
Overvoltage Category
This product is intended to be powered by MAINS that
comply to Overvoltage Category II, which is typical of cord-and-plug connected
equipment.
Pollution Degree
The InfiniiVision 6000L Series oscilloscopes may be operated
in environments of Pollution Degree 2 (or Pollution Degree 1).
Pollution Degree Definitions Pollution Degree 1: No pollution or only dry,
non-conductive pollution occurs. The pollution has no influence. Example: A clean
room or climate controlled office environment.
Pollution Degree 2. Normally only dry non-conductive pollution occurs.
Occasionally a temporary conductivity caused by condensation may occur.
Example: General indoor environment.
Pollution Degree 3: Conductive pollution occurs, or dry, non-conductive pollution
occurs which becomes conductive due to condensation which is expected.
Example: Sheltered outdoor environment.