KEP MMI-1500, Installation & Operation Manual

Page: 137 / 306

129
Set Style Parameters Description
Design Tip:
Use the Periodical styles along with the Animation
and Move parts to make window animations.
Set Style
Parameters Description
Periodical
JOG++ Inc. value
Upper limit
Break time
Maximum:
32767
This Attribute becomes active
automatically when the window is
active. The
Inc. value
is added to
the designated word, if the result
is not larger than
Upper limit
.
Once the upper limit is reached or
exceeded, the value returns to
zero and incrementing begins
again. The
Break time
is the time
between increments.
Periodical
JOG-- Dec. value
Bottom limit
Break time
Minimum:
-32768
This Attribute becomes active
automatically when the window is
active. The
Dec. value
is
subtracted from the designated
word, if the result is not less than
Bottom limit
. Once the bottom
limit is reached or exceeded,
decrementing stops. The
Break
time
is the time between
decrements.
Periodical
bounce Inc. value
Upper limit
Break time
This Attribute becomes active
automatically when the window is
active. The
Inc. value
is added to
the value of the designated word
at regular intervals as specified by
the
Break time
until the
Upper
limit
is reached. Then the
Inc
value
is subtracted from the
designated word until zero is
reached. This cycle is repeated
until the window becomes
inactive.
Note:
Interval times in actual operation may vary from specified. Do not use HMI intervals for critical timing.
Step up Low limit
High limit
Break time
This Attribute becomes active
automatically when the window is
active. The value is incremented
by 1 at regular intervals as
specified by the
Break time
until
the
High limit
is reached. Then
the value is reset to the
Low
limit
. This cycle is repeated until
the window becomes inactive.
Design Tip:
Use the Step styles
along with the Move part to
animate graphics within a fixed
pixel boundary.