KEN STONE XN10-8, Operation Manual

Page: 98 / 174

Transportation
Fixing of Machine
Fixing of Machine
After loading the machine to designated position, fix as per following requirements.
Transport Status
1. Lower the bulldozing blade.
2. Sufficiently extend the bucket cylinder and
bucket arm cylinder and then lower the boom.
3. Lift up the safety lock handle to the
locking position.
4. Stop the engine, withdraw the starter key,
and lock all locks.
5. Place the stop blocks (Wedges) on the
front and rear of tracks.
6. Affix chains or ropes securely to the lower
framework of machine, in order to prevent
the side slip of machine.
7. Fix the bucket by chains or ropes.
Important: A wood board can be placed beneath the
bucket to prevent damaging the ground by the bucket.
Safety Measures Taken during Transport
Warning
4-6
●
During the transport of machine, understand
and abide by all applicable safety rules, vehicle
codes, and traffic regulations.
●
Take the length, width, height, and weight
of the transport truck with loaded machine
into consideration, in order to select the best
transport route.
●
During the transport, do not start up or stop
the transport truck suddenly or drive at high
speed. Otherwise, it will result in movement or
unbalance of loaded machine.