KEN STONE XN10-8, Operation Manual

Page: 111 / 174

Maintenance
Maintenance List
5-13
Checking and maintenance item Page
Walk-Around Checking
Opening of engine hood and machine hood for checking 5-16
Walk-around checking of machine 5-16
Checking in driver seat 5-16
Daily routine checking (Every 10h)
Checking and adding of engine oil 5-18
Checking of fuel level 5-18
Checking of hydraulic oil tank oil level and adding of oil 5-19
Lubrication of Working Device 5-21
Every 50h
Checking and adjustment of track tension 5-23
Lubrication of slewing support and slewing motor gears 5-24
Water drainage from fuel tank 5-25
Checking of battery electrolyte level and adding of electrolyte 5-26
Every 250h
Replacement of engine oil and filter 5-28
Cleaning of air filter 5-39
Checking of accelerator control system 5-30
Replacement of fuel filter 5-31
Every 1000h
Replace the air filte 5-33
Check and adjust the engine valve clearance 5-33
Every 1500h
Check and clean the engine fuel injector nozzles 5-35
Every 2000h
Connection of Engine valve seats 5-36
Replace hydraulic oil and clean suction filter 5-36
Maintenance List
As nesessary
Replace the bucket teeth 5-38
Replace the bucket 5-39
Lubricate joysticks and pedals 5-40
Check the rubber track 5-41
Replace the rubber track 5-42