KEN STONE XN10-8, Operation Manual

Page: 90 / 174

●
Driving the machine on irregular surfaces,
such as new asphalt pavement and hot
steel plates exposed to campfire or burning
sun will result in irregular wear or damage
of tracks.
●
Do not move the rubber tracks to possibly
slip ground. Otherwise, the wear of the
tracks will be probably accelerated.
Operations
Handling of Rubber Tracks
Precautions
Please abide by the following precautions
during the operations of this machine:
●
Do not slew the under frame (The
superstructure is not slewed) when the
bucket working device is lifted in the front
of machine body. Otherwise, the load will
be concentrated at single point of tracks
and the tracks will be twisted to cause
rapid damage.
●
In all cases, avoid changing the route
suddenly or avoid the in-situ steering on
concrete surface whenever possible.
Otherwise the rubber tracks will be worn
or damaged.
●
Avoid the strong impact onto the rubber
tracks due to falloff.
●
The tracks will be damaged by salt,
potassium chloride, ammonium sulfate,
3-27