KEN STONE XN10-8, Operation Manual

Page: 10 / 174

Safety
General Precautions
General Precautions
You are liable to abiding by the safety laws
and regulations of relevant departments and
fulfilling the operations, checking, and
maintenance of machine.
As a matter of fact, all accidents are caused by
the non-compliance with basic safety rules and
precautions.
Most accidents can be avoided by authenticating
the potential dangers in advance.
Please read and understand all safety
information related to the prevention of
accidents. Please ensure to operate the machine
only after you have understood how to operate,
check, and maintain the machine correctly.
Abiding by All Safety Regulations
1-2
●
The machine must be operated, checked,
and maintained by trained and qualified
personnel.
●
During the operations, checking, and
maintenance of machine, ensure to
understand and abide by all rules,
regulations, precautions, and safety
measures.
●
Do not operate, check, or maintain the
machine under the adverse influence of
alcohol, drug, medicine, or fatigue or
under sleepy status.
Upon detection of machine abnormality
During the operations, checking, or
maintenance of machine, upon detection of any
machine abnormality (Such as noise, vibration,
smell, abnormal instrument, smoking or oil
leakage, error warning indication, and abnormal
display of electric control panel), immediately
notify a sales or service dealer and take
appropriate measure. Do not operate the
machine before the abnormality is solved.
Operating Temperature Range
To maintain the performances and prevent the
earlier wear of machine, please abide by the
following operating conditions.
●
Do not operate the machine when the
outside temperature is more than+45
℃
or
less than-15
℃

The operations under+45
℃
outside
temperature will probably result in engine
overheating and deteriorated engine
performance. In addition, the hydraulic oil
will probably become really hot to harm
the hydraulic devices.

The operations under 15
℃
outside
temperature will probably harden the
rubber parts (Such as gaskets) and cause
earlier wear or damage of machine.

To operate the machine under the