KEN STONE XN10-8, Operation Manual

Page: 114 / 174

Maintenance
Walk-Around Checking
Opening of engine hood and machine
hood for checking
5-16
1. Check for presence of branches, leaves, oil,
and other inflammable around the engine
and battery.
2. Check for presence of lubricating oil and
coolant leakages around the engine.
3. Check hydraulic oil pipes, hydraulic
devices, hoses, and connectors for oil
leakage.
Walk-around checking of machine
1. Check lamps for presence of dusts and
damages and check lamp bulbs for burnout.
2. Check hydraulic accessories and hoses for
damage.
3. Check bucket, bucket teeth, and side teeth
for wear, damage, and looseness.
4. Check hook, anti-slip stop block, and hook
seat on bucket for presence of damage.
(Optional)
5. Check handrails, footplates, and anti-slip
surfaces for damage and check for any
loose bolt.
6. Check tracks and track shoes for presence
of slip, check track carrier rollers, idling
device, and sprocket for presence of
damage and wear, and check for loose bolt.
7. Check traveling motor for oil leakage.
8. Check shelter and guard plates for damage
and check for loose nuts and bolts.
9. Check exterior and interior rear view
mirrors for contamination and damage and
when necessary adjust.
10. Check labels for presence of dusts and
damage.
Checking in Driver Seat
1. Check seat and seat belt for presence of
dust and damage.
2. Check driver seat for presence of dust, oil
dirt, and other inflammable.
3. Check monitor, electric devices, and
switches for oil dirt, dust, and damage.