KEN STONE XN10-8, Operation Manual

Page: 166 / 174

Optional Products
Hydraulic Breaking Hammer
Hydraulic Breaking Hammer
For the operations of breaking hammer, please
refer to the separately provided manual of
hydraulic breaking hammer.
Warning
Do not use breaking hammer when the track
width becomes narrower.
●
Always operate the machine with
extended track width of 950mm, in
order to improve the machine stability
to the maximum extent. Operating the
machine with narrow track width
(800mm) will probably result in rollover
of machine due to poor stability.
●
If it’s necessary to operate the machine
with narrow track width (800mm),
retract the bucket working device and
lower the boom to reduce the gravity
center and face the machine towards
front before traveling.
While operating the optional products such as
breaking hammer, tipping bucket, and grab
bucket, ensure that the track width is extended
to 950mm.
Important:
While installing an attachment,
ensure that it’s suitable for the machine model
in use.
If the recommendations are required for the
choice of attachment, please contact your sales
or service dealer.
8-6