KEN STONE XN10-8, Operation Manual

Page: 20 / 174

Safety
Operation Precautions
Operation Precautions
Operating Machine with Maximum Track
Width
Always operate the machine with extended
track width of 950mm, in order to improve the
machine stability to the maximum extent.
Operating the machine with narrow track width
(800mm) will probably result in rollover of
machine due to poor stability.
If it’s necessary to operate the machine with
narrow track width (800mm), retract the bucket
working device and lower the boom to reduce
the gravity center and face the machine towards
front before traveling.
Guarantee of Good Visibility
Checking of Visibility before Operations of
Machine
During operations in a dark place, turn on the
working lamp and headlamp of machine and
when necessary install additional lighting
devices. In event of poor visibility due to severe
weathers (Such as fog, snow, rain, and haze),
stop the operations of machine till the visibility
turns good.
Clean the windows, mirrors, lamps, and camera
to keep good visibility. Adjust the mirrors and
camera to optimal positions to ensure that the
driver sitting in the driver seat can see the rear
view (Blind spot).
The non-authorized modification or the
installation of non-approved attachments will
probably impair the visibility. The operator’s
visibility must conform to the requirements of
ISO 5006.
Do not carry people on the machine
All personnel are prohibited to sit on any part
of machine at any time during traveling or
operations of machine.
1-12