KEN STONE XN10-8, Operation Manual

Page: 59 / 174

Control
Joysticks and Pedals
Joysticks and Pedals
Safety lock handle
Warning
●
Before standing up from the driver seat
to adjust the operator’s seat, lower the
working device to the ground, lift up the
safety lock handle to lock it, and stop
the engine. When the safety lock handle
is lowered down (Unlocked), the
accidental touch of any joystick will
result in sudden movement of machine
and cause serious injuries or deaths.
●
Please be noted that, even if the safety
lock handle is placed at locking position,
the bulldozing blade, boom, and
auxiliary hydraulic controls can’t be
locked.
Do not touch such controls accidentally.
●
While lifting up or lowering down the
safety lock handle, take cautions not to
touch any joystick.
●
Before leaving the driver seat, lower the
working device onto the ground, lift up
the safety lock handle to locking position,
and stop the engine. Meanwhile, ensure
to withdraw the key, close the doors and
hoods, and carry the key with you and
then preserve it in a designated place.
This device is functioned to lock the operations
of bucket working device and machine slewing.
When pushing the lever forward, except for the
walking lever, the other levers cannot work
Accelerator joystick
Used to control engine speed.
(A)...low idle
(B)...Maximum speed
Joysticks
Warning
2-11
●
Before starting operations, please carefully
check and confirm the joystick mode to be
used.