Section 7: SCPI command reference
Series 2280 Precision DC Power Supply Reference Manual
7-112
077085503 / March 2019
:SYSTem:BEEPer:ERRor[:STATe]
This command allows you to turn the beeper on or off.
Type
Affected by
Where saved
Default value
Command and query
Recall settings
Instrument reset
Power cycle
Save settings
1 (ON)
Usage
:SYSTem:BEEPer:ERRor[:STATe] <state>
:SYSTem:BEEPer:ERRor[:STATe]?
<state>
Disable the beeper:
OFF
or
0
Enable the beeper:
ON
or
1
Details
This command enables or disables the beeper for error messages. When enabled, a beep signals
that an error has happened.
Example
:SYSTem:BEEPer:ERRor ON
Enable the error beeper.
Also see
(on page 7-119)