HP3458A Emulation Mode
H-16
AZERO ON
DCV AUTO
DISP ON
EMASK 32767 (all errors enabled)
FSOURCE ACV
MEM OFF
MFORMAT SREAL NDIG 7
NPLC 10
NRDGS 1,AUTO
OCOMP OFF
OFORMAT ASCII
TARM AUT
TIMER 1
TRIG AUTO
All other commands and settings are unaffected.
REV?
Purpose
To request the main and front panel revision levels.
Format
REV?
Response
Main firmware revision/Front panel firmware revision
Description
The
REV?
query allows you to request both the main processor firmware revision level, and the front
panel display controller firmware revision level. The instrument returns two numbers separated by a
slash: (1) the main processor firmware revision level, and (2) the front panel display controller firm-
ware revision level.
The response form used by the Model 2002 is different from that of the HP3458A.
RMEM?
Purpose
To request readings stored in memory.
Format
RMEM?
Response
Reading #1, Reading #2, ... Reading #n
Description
The
RMEM?
query returns all readings currently stored in memory. Note that the format of readings
returned differs from that of the HP3458A. The Model 2002 returns all readings in one text block,
separated by commas, with a string terminator only at the end of the block. The HP3458 includes a
terminator between each reading. Also note that this command has been changed to a query-only
format.
RQS
Purpose
To enable/disable status register bits that can cause an SRQ.
Format
RQS <mask>
Summary of Contents for 2002
