IEEE-488 Reference
3-96
selected value. Also, a valid NPLC value sent using the :NPLC <n> command disables auto
NPLC.
Auto NPLC is also coupled to auto aperture. Enabling or disabling auto NPLC also enables or
disables auto Aperture. Also, a valid aperture value sent using the :APERture command disables
auto NPLC.
PRINT #1, "output 16; :curr:ac:nplc:auto on; auto?"
' Enable auto NPLC for ACI
PRINT #1, "enter 16"
' Get response from 2002
:COUPling AC|DC
[:SENSe[1]]:CURRent:COUPling AC|DC
Specify coupling for ACI
[:SENSe[1]]:VOLTage:COUPling AC|DC
Specify coupling for ACV
[:SENSe[1]]:FREQuency:COUPling AC|DC
Specify coupling for FREQ
AC
AC coupling
DC
AC+DC coupling
:COUPling?
Query currently programmed coupling
This command is used to select the input coupling for the AC, ACV and the FREQ functions.
When AC coupling is selected, a DC blocking capacitor is placed in series with the AC measure-
ment circuit. This removes the DC component from the measurement.
When DC coupling is selected, the blocking capacitor is removed. Subsequent measurements
reflect both the AC and DC components of the signal (AC+DC).
PRINT #1, "output 16; :curr:ac:coup dc; coup?"
' Select AC+DC for ACI
PRINT #1, "enter 16"
' Get response from 2002
RANGe commands
[:UPPer] <n>
[:SENSe[1]]:CURRent:AC:RANGe[:UPPer] <n>
Set measurement range for ACI
[:SENSe[1]]:CURRent:DC:RANGe[:UPPer] <n>
Set measurement range for DCI
[:SENSe[1]]:VOLTage:AC:RANGe[:UPPer] <n>
Set measurement range for ACV
[:SENSe[1]]:VOLTage:DC:RANGe[:UPPer] <n>
Set measurement range for DCV
[:SENSe[1]]:RESistance:RANGe[:UPPer] <n>
Set measurement range for
Ω
2
[:SENSe[1]]:FRESistance:RANGe[:UPPer] <n>
Set measurement range for
Ω
4
<n> = 0 to 2.1
Expected reading in amps (ACI and DCI)
0 to 775
Expected reading in AC volts (ACV)
0 to 1100
Expected reading in DC volts (DCV)
0 to 1.05e9
Expected reading in ohms (
Ω
2)
0 to 2.1e6
Expected reading in ohms (
Ω
4)
DEFault
2.1 (ACI and DCI)
775 (ACV)
1100 (DCV)
1.05e9 (
Ω
2)
2.1e6 (
Ω
4)
MINimum
0 (All functions)
MAXimum
Same as DEFault
Program fragment
3.18.7
Parameters
Query
Description
Program fragment
3.18.8
Parameters
Summary of Contents for 2002
