IEEE-488 Reference
3-65
:TRIGger[:SEQuence[1]]
:TIMer <n>
:TIMer?
:SIGNal
:TCONfigure
:PROTocol <name>
:PROTocol?
:DIRection <name>
:DIRection?
:ASYNchronous
:ILINe <NRf>
:ILINe?
:OLINe <NRf>
:OLINe?
:SSYNchronous
:LINE <NRf>
:LINE?
Set timer interval (0.001 to 999999.999 sec).
Request the programmed timer interval.
Loop around control source.
Path to configure Triggers:
Select protocol (ASYNchronous or SSYNchronous).
Query protocol.
Enable (SOURce) or disable (ACCeptor) Bypass.
Query direction.
Path to configure asynchronous Trigger Link:
Select input line (1 to 6).
Query input line.
Select output line (1 to 6).
Query output line.
Path to configure semi-synchronous Trigger Link:
Select trigger line (1 to 6).
Query trigger line.
0.1
ASYNchronous
ACCeptor
2
1
1
√
√
√
3.23.7
3.23.8
3.23.9
Notes:
1. Defaults for continuous initiation:
:SYSTem:PRESet enables continuous initiation
*RST disables continuous initiation
2. TLINK and RTCLock (Arm Layer 1) are non-SCPI parameters for the :SOURce command. The command (:SOURce), and all the other parameters
are SCPI confirmed.
3. Defaults for count (Arm Layer 2 and Trigger Layer):
:SYSTem:PRESet sets the count to INF (infinite).
*RST sets the count to 1.
Table 3-15 (Continued)
Trigger command summary
Command
Description
Default
parameter
SCPI
Ref.
Summary of Contents for 2002
