Keithley Instruments, Inc.
28775 Aurora Road
Cleveland, Ohio 44139
1-888-KEITHLEY
www.keithley.com
Specifications are subject to change without notice.
SPEC-2002 Rev. H / February 2009
Page 13 of 14
Model 2002
Multimeter Specifications
MAXIMUM INPUT LEVELS
Rated
Input
53
Overload Recovery Time
HI to LO
±1100V
< 900 ms
HI Sense to LO
± 350V pk 250V rms
< 900 ms
LO Sense to LO
± 150V pk 100V rms
< 900 ms
I Input to LO
2A, ± 250V (fused)
—
HI to Earth
±1600V
< 900 ms
LO to Earth
± 500V
DELAY AND TIMER
Time Stamp
Resolution:
1µs.
Accuracy:
±0.01% of elapsed time ± 1µs.
Maximum:
2,100,000.000000 seconds (24 days, 7 hours).
Delay Time
(Trigger edge to reading initiation)
Maximum:
999,999.999 seconds (11 days, 14 hours).
Resolution:
1ms.
Jitter:
±1ms.
Timer
(Reading initiation to reading initiation)
Maximum:
999,999.999 seconds (11 days, 14 hours).
Resolution:
1ms.
Jitter:
±1ms.
IEEE-488 BUS IMPLEMENTATION
Implementation:
IEEE-488.2, SCPI-1991.0.
Multiline Commands:
DCL, LLO, SDC, GET, GTL, UNT, UNL, SPE, SPD.
Uniline Commands:
IFC, REN, EOI, SRQ, ATN.
Interface Commands:
SH1, AH1, T5, TE0, L4, LE0, SR1, RL1, PP0, DC1, DT1, C0, E1.
DIGITAL I/O
Connector Type:
8 pin “D” subminiature.
Input:
One pin, TTL compatible.
Outputs:
Four pins. Open collector, 30V maximum pull-up voltage, 100mA maximum sink current, 10
Ω
output impedance.
Control:
Direct control by output or set real-time with limits.
GENERAL SPECIFICATIONS AND STANDARDS COMPLIANCE
Power
Voltage:
90–134V and 180–250V, universal self-selecting.
Frequency:
50Hz, 60Hz, or 400Hz, self-identifying at power-up.
Consumption:
<55VA.
Environmental
Operating Temperature:
0°C to 50°C.
Storage Temperature:
–40°C to 70°C.
Humidity:
80% R.H., 0°C to 35°C, per MIL-T-28800E
54
Para 4.5.5.1.2.
Calibration
Type:
Software. No manual adjustments required.
Sources:
2 DC voltages, 6 resistances, and 5 DC currents. All other functions calibrated (adjusted) from these sources
and a short circuit. No AC calibrator required for adjustment.
Average Time to Perform:
40 minutes for comprehensive calibration, 6 minutes for AC-only calibration.
Process
:
MIL-STD 45662A.
53
For voltages between other terminals, these ratings can be added.
54
For MIL-T-28800E, applies to Type III, Class 5, Style E.
Summary of Contents for 2002
