SERIES 9900V: SINGLE-MODE DIGITAL VIDEO MULTIPLEXERS
DESCRIPTION
A 9900V link supports from 2 to 10 video channels while
the 9900VD link also supports one channel of data. The
High Capacity version of the 9900V can support from 12 to
20 channels of video. The 9900V-T transmitter consists of
a single 1-RU (rack unit) module with up to 10 video inputs
and one fiber output. All video channels are transmitted
over single-mode fiber to the 9900V-R receiver, which con-
sists of a single 1-RU module with one fiber input and from
2 to 10 video outputs. 9900VD models include one return
data output connection as well. High capacity 9900V mod-
els consist of two interconnected 1-RU units on both the
transmit and receive ends of the system with a total of from
12 to 20 video connections. For a complete list of available
models, please turn to the last page.
INSTRUCTION
MANUAL
FIGURE 1: SYSTEM DIAGRAM 9900V & 9900VL MODELS
one single-mode
optical fiber
from two
to twenty
video inputs
from two
to twenty
video outputs
9900V-T
9900V-R
FIGURE 2: SYSTEM DIAGRAM 9900VD MODELS
one or two single-mode
optical fibers
from two to ten
video inputs
one
data ouput
from two to ten
video outputs
one
data input
9900VD-T
9900VD-R
www.fiberoptions.com
Fiber Options
80 Orville Drive, Bohemia, NY 11716
phone: 631.567.8320 or 800.342.3748
fax: 631.567.8322 or 877.342.3732
GENERAL
This manual is a guide to the installation and operation of
the 9900V series fiber optic digital video transmission
system and 9900VD series fiber optic digital video with
return data transmission system. Please read the entire
manual before installing the equipment.
Note: The series numbers 9900V-T and 9900V-R will be
used to describe all models of transmitters and receivers
unless noted otherwise.
The 9900V-T transmitter consists of a single 1-RU (rack
unit) module with from 2 to 10 video inputs and one fiber
output. The 9900V-R receiver unit has one fiber input
and from 2 to 10 video outputs.
The 9900VD-T transmitter has from 2 to 10 video inputs
with 1 data output connection and 1 or two fiber input/out-
puts. The 9900VD-R receiver has 1 or 2 fiber input/out-
puts, from 2 to 10 video outputs, and 1 data input.
Models with from 12 to 20 inputs (9912V to 9920V) con-
sist of two 1-RU modules at each end, joined by an opti-
cal jumper.
LASER SAFETY
CAUTION:
Class I Laser Product.
Invisible Radiation at Aperture.
Avoid Exposure to Beam.
Although this is a Class I laser product, which is not con-
sidered hazardous, keep in mind that the beam is invisi-
ble. For your further protection we suggest that you:
✹
Do not turn on any transmitter unit unless both ends
of the fiber are connected.
✹
Never look into the fiber optic connector on the back
of any unit when the unit is turned on.
✹
Never look directly at the end of the fiber optic cable
when the unit is turned on.
✹
Do not aim activated fiber optic cable ends at reflec-
tive surfaces or other persons.
. . . light years ahead
11-9900V-000918
!
