Operators Manual
Section 5-11
Note:
An adjustment may be necessary for the
Return To
Foul Line
menu. This adjustment is the first menu in the
System Control Distance
menu. It should be adjusted so the
machine travels the correct distance back to the foul line
.
The return distance may be a couple of counts different than
the distance to the end of the pindeck. Adjust these
numbers to control forward and reverse travel distances.
(The squeegee must travel beyond the tail plank and the
machine should not hit the approach too hard during the
return trip.)
When the correct
END CLEANING DISTANCE
is determined for
your bowling center, this value needs to be entered in every
program (in the CHANGE PROGRAM SETTINGS
menu).
Squeegee Goes Off the Pindeck When the
Rear Wall is About 2" Behind the 2 & 3 Spots
Approximately
2 Inches
