Operators Manual
Section 2-1
SECTION II - Machine Description
A. Rear; Center; Front; Right; & Left Side
With the machine setting on the approach in a position
ready to be operated on the first lane, the following
descriptions will be used:
CONDITIONING or REAR END:
The CONDITIONING or REAR END
shall be the end of the machine closest to the operator
and nearest the approach, where the buffing brush is
located.
COMPUTER or CENTER COMPARTMENT:
The COMPUTER or CENTER
COMPARTMENT houses the electrical components and is
located between the CONDITIONING END and the CLEANING
END.
CLEANING or FRONT END:
The CLEANING or FRONT END shall be
the end nearest to the pins, where the cleaning tank and
the Duster Assembly is located.
RIGHT SIDE:
The RIGHT SIDE is the side to the right of
the operator as he faces the pins. This is also the ten-
pin side.
LEFT SIDE:
The LEFT SIDE is the side opposite the right,
to the left of the operator as he faces the pins (seven-
pin side).
