Operators Manual
Section 4-28
If this is correct, depress the
NEXT
key. The following
prompt will appear:
01F 2L- 2R X 03
00->03 FT IPS=14
01F
is the menu number for the first load screen for
forward oil. There are 15 possible load screens for forward
oil. If the oil pattern distance is reached in less than 15
screens, then the remaining screens will not be shown.
The next item
2L -> 2R
designates the load (the length
of the stream of oil applied to the main transfer roller)
will run from the 2 board on the left to the 2 board on the
right.
The next item
X 03
determines how many 2 to 2’s will
be applied, in this case it is 3. On the bottom line the
00 -> 03 ft IPS =14
says that the machine will travel from
0 ft (the foul line) to 3 ft at 14 inches per second (IPS).
When the screen is first displayed, the left load size
designator
2L
will be blinking. This means it is the one
that can be changed.
By depressing the UP ARROW once the 2L will increment
to 3L. It is possible to increment this value to as close
as
3 boards
away from the right side designator 2R. When
the desired left side load designator is reached depress
ENTER and the right side designator 2R will begin blinking
(kind of like a digital watch).
The blinking designator indicates the right load limit
is ready to be changed. Use the Up or Down arrow until you
reach your desired number, then depress ENTER.
Now
03
will begin blinking, Up or Down arrow this to
the number of loads you want and depress ENTER.
Two things will now happen: 1)The
IPS
number will begin
blinking, and 2)the
distance
it takes for that load screen
will re-calculate.
