Operators Manual
Section 4-7
The following prompt will appear:
LAST LANE ?
16 16
Now you must input the number of the last lane to be
cleaned/conditioned. Appearing with the above prompt will
again be two numbers, this time displaying the number of the
last lane cleaned/conditioned during the previous run.
If these numbers are incorrect, you must enter the
correct number. Using the
UP
or
DOWN ARROWS
again, change
the number to the number desired. Once again, only the
right side number will change.
NOTE:
When entering the last lane number, depressing
the Left Arrow key on the keypad will automatically SUBTRACT
10 lanes from the displayed last lane (unless lane #1 is
displayed). Depressing the Right Arrow key will ADD 10
lanes to the displayed last lane (unless the number of the
last lane in the center is displayed).
Once you reach the desired number, depress
ENTER
, and
both numbers will change to the one you selected. If this
is correct, depress the
NEXT
key.
At this point, this prompt will appear:
IS THIS CORRECT?
01 => 16 PRG 01
This means the machine will run lanes 1 through 16
and the cleaning/conditioning program is #1.
If the starting and ending lane information is
incorrect, depress the
LAST
key until you return to the
starting and ending lane number prompts.
