Operators Manual
Section 4-11
3. Duster Control Menu
Depress the MENU key until the following appears on the
screen:
* DUST CTRL&RSET
0400 HIT EXT ENT
While this screen is displayed, depressing the
DOWN
ARROW
key will unwind a portion of duster cloth; depressing
the
UP ARROW
will wind up the duster cloth. If the Up Arrow
does not work check the Wind-Up Switch. Input 010 could be
stuck or the machine could be in the upright position.
If more cloth needs to be unwound, depress the START
BUTTON on the handle. By holding down this button the cloth
will unwind until you release the button. Pressing the
start button on the handle again will wind up the cloth
until the wind-up switch is actuated.
This is very handy when changing the duster cloth.
With the handle folded over in the transport position the
start button is close to the Cleaning Compartment, right
where you need it.
To reset the duster cloth counter, depress the
EXIT
then
ENTER
keys while this screen is displayed. Be certain
to perform this procedure each time a new roll of duster
cloth is installed.
When reset, the counter will read "
0400
", the average
number of lanes that a roll of cloth will last. It also
resets the present unwind time of the duster cloth back to
the default time.
The
unwind time
is the time the unwind motor is ON to
let out duster cloth. While running the machine, this time
value increments up one-tenth of a second every
35
conditioning or cleaning runs. Every
80
lanes the
wind-up
time decrements one-tenth of a second. These time values
are needed to compensate for the changing size of the duster
cloth rolls. The fresh roll gets smaller and needs more
time, while the used roll gets larger and needs less time.
