Operators Manual
Section 4-47
8. System Control Duster Menus
This series of screens will be used to adjust the duster
unwind and default times. It is also possible to change the
default number of lanes that a new roll of cloth will clean.
Press the
MENU
key until the following screen appears:
* SYSTEM CONTROL
DUSTER
Press the
NEXT
key, the following screen will appear:
PRESENT UNWIND
09 TIME 09
This screen will display the current unwind time setting
for each "ratchet" of cloth. This number will automatically
increase as the size of the supply cloth roll decreases.
This value will return to the default setting when a new
roll of cloth is installed and the cloth counter is reset.
This prompt is referring to the amount of time in tenths
of seconds. The "09" is actually 0.9 seconds. The time can
be adjusted by using the UP or DOWN ARROWS. When the
desired time is reached, press ENTER.
NOTE: Resetting the DUSTER counter prior to the roll of
cloth being empty could reduce the cleaning efficiency of
the machine. The cushion roller must be allowed to drop far
enough to contact the lane. In this menu it is possible to
correct the present unwind time if one of your pinchasers
has presented you with this problem
.
The unwind time varies from 09 for a fresh roll to 21
for an almost empty roll. If accidentally reset, use an
educated guess on how much of the roll is already used and
set your time accordingly. EXAMPLE: If the roll is about
half used then set the time to 15.
