Operators Manual
Section 4-43
Depress the
ENTER
and then the
NEXT
key and the
following will appear:
DROP BUFFER ADV
50 INCHES 50
The machine is designed to lower the Buffing Brush
during a simultaneous cleaning and conditioning run when
return oil is being applied. It will be traveling at 54-56
inches per second in high speed. For the Buffing Brush to
contact the lane at the programmed distance, it must start
lowering prior to reaching that distance.
By changing this setting the brush will be lowered onto
the lane at, prior to, or after the designated conditioning
distance.
The Voltage Supply in the bowling center ultimately
determines the final high speed of each machine. Simply
watch the operation of the buffer as it is returning from
the pindeck. Adjust the
Drop Buffer Advance
until the
buffer turns on at the desired location in reference to the
end of the oil pattern.
Use the UP or DOWN ARROW to change the number on the
right side of the screen. When the desired number is
reached, depress ENTER. The factory default for this
parameter is 50.
This concludes the selections in the
SYSTEM CONTROL BUFFER menu.
