Operators Manual
Section 2-2
B. Keypad
Located under the lid of the Conditioning end is the
computer keypad. This keypad is used to enter all
programming information, as well as to start the machine.
The keypad consists of 24 input keys and a two-line Liquid
Crystal Display (LCD) where the menu items and prompts
appear.
The following keys are used on the keypad:
MENU:
Pressing this key will display and advance the
available main menus for the operator. It will also act
as a zero button when the machine is in operation. When
it stops the operating machine it resets the program to
ZERO.
NEXT:
Use this key to advance within a main menu from one
menu prompt to the next.
LAST:
This key will return the user to the last menu
prompt within a main menu.
ENTER:
This key is used to complete an entry of data or
information requested by a menu prompt.
EXIT:
This key is used to return to the Operators Menus
from the Managers Menus.
START:
This key will activate the handle start button on
the machine when it is in the START MENU sequence.
UP & DOWN ARROWS:
Use of these keys will increment or
decrement numbers asked for in certain menu prompts, such
as the starting lane number.
LEFT & RIGHT ARROWS:
Use of these keys will increment or
decrement the starting lane numbers to the first lane or
last lane available in the center. In certain menu
prompts, these keys will increment or decrement the
displayed values by a count of ten. It functions
differently in several menu prompts.
