Information
Instructions for opening the cable entrance area:
●
Lay the KeTop with the display facing down onto a plane and clean table
(preferable on ESD pad) and take care not to damage the KeTop and its
operating elements.
●
For opening and closing the cable entrance area use the following type of
screwdriver: "Phillips size 2".
Instructions for modifications in the cable entrance area:
●
Unplug the main connector (S22) by pulling on its wires with your fingers.
Do not use any sharp objects.
●
For unplugging the RJ-45 jack (S11 oder S4), actuate the locking lever:
Fig.4-2:
Uplugging main connector (S22) and RJ-45 jack (S11 oder S4)
1
... main connector
2
... RJ-45 jack
WARNING!
●
Make shure that the main connectors (S22) and the RJ-45 jack (S11 oder
S4) correctly snap in when you plug them in. Otherwise the emergency stop
functionality (S22) or the correct shielding (S11 oder S4) might not be given
any more.
●
Validate the emergency stop-functionality before re-starting the KeTop.
Information
Instructions for closing the cable entrance area: Make sure that
●
the sealing is clean, not damaged and correctly positioned in the cable
entrance area,
●
no cables are squeezed in,
●
the cover of the cable entrance area is attached again with all 6 screws
(torque: 0.4 bis 0.5 Nm). Otherwise the protection degree cannot be guar-
anteed.
Connection
© KEBA 2009
User's Manual V1.50
25
Summary of Contents for KeTop T100
Page 1: ...KEMRO KeTop T50VGA User s Manual V1 50 Translation of the original instructions ...
Page 4: ......
Page 10: ......