●
Machine tools
●
Textile machines
●
Printing machines
●
Theater backdrops
●
and similar
in normal operating modes
●
Automatic
as well as
●
Setting
●
Teaching
●
Testing
●
and similar
in half automatic or manual mode.
Enabling switches and an emergency stop button (or halt-button) are the safety
elements of the device.
The Handheld Terminal is intended for fixed connection to a robot. Handheld
Terminals for temporary connection must not have a red-yellow emergency
stop button. In this case a handheld terminal with grey halt-button is available.
To meet the safety category 3 PL d in accordance with EN ISO 13849-1, the
safety functions are realized with 2 circuits.
The selection of the Handheld Terminal which is suitable for the machine and
the projecting of the additional functions must obey the necessary hazard
analyses and risk assessment bounded by law.
For intended use of the Handheld Terminal also please pay attention to
14 "CE Conformity, Directives and Standards" on page 132
.
1.4
Notes on this document
This manual is integral part of the product. It is to be retained over the entire
life cycle of the product and should be forwarded to any subsequent owners
or users of the product.
1.4.1
Contents of document
●
Safety Precautions
●
General Instructions
●
Connection
●
Membran Keypad
●
Display
●
Software
●
Specific Operating Instructions
Introduction
KeTop T50VGA
© KEBA 2009
User's Manual V1.50
12
Summary of Contents for KeTop T100
Page 1: ...KEMRO KeTop T50VGA User s Manual V1 50 Translation of the original instructions ...
Page 4: ......
Page 10: ......