manualshive.com logo in svg

Keba KeTop T100, User Manual, Page: 152 / 163

Share
Download
Keba KeTop T100 User Manual Download Page 152

shielding clips). The smaller the distance between the contacting of the con-
nector housing on the control cabinet to the cable clip in the control cabinet,
the better the shield damping.

The interference immunity of the device with the connection type presented
above is also decisively influenced by the satisfactory separation of the control
signals and the data line signals. The better the separation of the two signal
types and the shorter the shielding connection, the higher will be the interfer-
ence immunity of the complete system.

If the Ethernet is used as the communications interface (KeTop T100 only) one
of the two connection cables provided for the purpose of connecting to a control
system must be used (IC020 or IC040). Both cables carry the Ethernet signals
to a suitable connector (RJ-45) and thereby produce a continuous shielding
connection and also the required characteristic impedance of the cable.

Fig.14-14:

Connection cable IC020 or IC040 in the control cabinet

CE Conformity, Directives and Standards

KeTop T50VGA

© KEBA 2009

User's Manual V1.50

152

Summary of Contents for KeTop T100




































































































































































Reviews:

No comments