10.4.2
Interior view
Fig.10-15:
Interior view of connection box
K1
... 17-pin female connector (Coninvers)
for KeTop connection cable
X1
... Terminal block for power and control
lines (enabling switch and emergency
stop)
X3
... Terminal block for data lines
SHIELD
... Cable shield clamp with connection
surface for cable shield of data lines
(not used for strain-relief of the cable!)
Details about connecting the connection box KeTop CB 211 to the KeTop see
subchapter "Wiring diagram" of the main chapters "Ethernet" and "RS-422-A".
10.4.3
Technical data of the connection terminals
The following technical data apply to the X1 and X3 connector terminal blocks
already available in the Junction box:
Connection capacity:
rigid / flexible / wire gages: [mm
2
]/[mm
2
]/AWG 0.14-1.5 / 0.14-1.5 / 28-16
flexible with wire end ferrules without / with
plastic sleeve: [mm
2
]
0.25-1.5 / 0.25-0.5
Grid dimension:
3.81
Insulation length:
[mm
2
]
7
Tightening torque:
[Nm]
0.22-0.25
PHOENIX order data:
Accessories
KeTop T50VGA
© KEBA 2009
User's Manual V1.50
112
Summary of Contents for KeTop T100
Page 1: ...KEMRO KeTop T50VGA User s Manual V1 50 Translation of the original instructions ...
Page 4: ......
Page 10: ......