KAN-therm DC 4000, Instructions For Use Manual

Page: 22 / 216

16 ENGLISH
Follow the installation instructions supplied by the fitting and pipe manufacturers.
Assure by pressing leaky press fittings that no humidity respectively lotic water reaches into the
inside of the machine!
After finishing the work, check the installation with appropriate testing equipment and assure that
it is leakproof!
Charger and battery:
This charger is not intended for use by children and persons
with physical, sensory or mental limitations or a lack of experi-
ence or knowledge. This charger can be used by children aged
8 and above and by persons who have physical, sensory or
mental limitations or a lack of experience or knowledge if a per-
son responsible for their safety supervises them or has instruct-
ed them in the safe operation of the charger and they under-
stand the associated dangers. Otherwise, there is a danger of
operating errors and injuries.
Supervise children during use, cleaning and maintenance. This
will ensure that children do not play with the charger.
Do not charge non-rechargeable batteries.
Danger - electrical voltage!!
Only use the charger indoors!
Protect the charger from moisture!
Never allow children to use the machine. Children should be supervised to ensure that they do
not play with the tool.
Keep children away from the battery charger and the working area!
Keep your battery charger out of reach of children!
Pull out the mains plug immediately if the battery charger starts to smoke or flames emerge!
Do not insert objects into the ventilation slots on the battery charger – there is a danger of elec-
tric shocks and short circuits!
Do not recharge a fully charged battery pack!
Protect battery packs from water and moisture!
Do not expose battery packs to naked flame!
Do not use faulty or deformed battery packs!
In areas with high metal dust exposure do not load any battery packs with AIR COOLED
chargers.
Do not open battery packs!
Do not touch or short-circuit battery packs!